Tips For Purchasing The Right Drum Pump

1.Choosing The Best Pump For Your Application

Before you can effectively choose a chemical drum pump for your application, you’ll need to consider a couple of things. As such, the following should be considered before diving into the purchasing phase:

Flow Rate

Have you thought about a suitable flow and head rate that suits your needs? If for some reason there are truly unique aspects of your job, then you’ll need to select something that has high pressure and flow rates. As a side point, acid pumps are a very popular type of pump which you might be interested in

Portability And Size

Will you be required to provide transport for the pump to take it to your facility? Have you thought about your floor space and the footprint needed? If you’re working in a tight space, then there’s a chance that you may need to think about a smaller-sized pump. Due to these factors, you’ll need to keep the spacing parameters and needs in mind before making a purchase.


Have you thought about the types of chemicals that you’re planning to pump? If you’re working with toxic or corrosive chemicals, you’ll need to purchase something that will be able to handle the needs of your applications. As such, it’s in your best interest to purchase a pump that can easily support harsher conditions.


The delicate yet strong pumps inside drum pumps usually tend to have special temperature limits. Hence, it’s a good idea to consider the max temperature of travelling fluids. Only when you determine the temperature then will you be able to select a pump that was built to last.

Specific Viscosity And Gravity

If there’s a chance of high viscosity and specific gravity fluids being pumped, a specialized pump will need to be used. This is to ensure that your applications are properly handled.


It should be noted that each pump is usually fitted with special motors that allow for the most optimal functioning capabilities. As such, some types of motors are more suited for applications than others. Some of these include air, electric, or even explosion-proof electric.

For some applications, cordless variants are better suited and they offer more flexibility. Additionally, you’ll need to consider the types of environment that your pump will be operating in and if the motor is suited.

2. Select The Right Accessories

If you didn’t already know, some accessories tend to enhance the performance of drum pumps and they also make them better suited to applications. Manufacturers also offer a series of accessories that ensure the effectiveness and efficiency of your devices. Some of these include:

Barrel Or Bung Adapters

These specially designed adapters tend to come in an array of materials. They work to create a snug fit around the barrel. This then allows the vertical position to be maintained by the tube in the barrel.


These usually allow the operators to control the flow of the flowing liquids.


Filters are essential and prevent damage by restricting debris and dirt from going inside of the components.


Flowmeters are essential and they allow operators to control and measure the amount that is being pumped in a precise manner.

Static Protection Kits

These kits will allow the safe transfer of combustible and flammable liquids.

3. Follow Appropriate Safety Protocols

Before these pumps can be used properly, they need to follow the strictest safety standards. The following should be considered:


All personnel should be trained on the installation, maintenance, and operating aspects of the drum pump. In essence, they should be trained to know to perform any task.


It is recommended that before working on drum pumps you always wear the proper PPE. These can be anything from face shields, goggles, helmets, gloves, and others that are deemed necessary.


Chemicals should always be stored and used in an upright manner.


Before you can operate the pump, it’s best to ensure that the power supply being used is suited. If for some reason it’s in an off position, you’ll find yourself running into a series of issues.

Neutralizing And Cleaning

After the pumping phase is completed, you may need to switch chemicals. Before doing so, it is advised that you clean the system with a neutralizing fluid or clean water. However, the fluids used should be compatible with the pump and the fluids that are pumped.

Back to top